Thanks! It works :-) Regards,
Thomas. -----Urspr�ngliche Nachricht----- Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Auftrag von Thilo Salmon Gesendet: Freitag, 29. August 2003 14:11 An: [EMAIL PROTECTED] Betreff: Re: [Asterisk-Users] additional digit in front of the dialedextenesion by outgoing pri/E1 call Thomas, > If the call going out the pri dials with an additional '0' before the dialed > number. > This is for caller number AND called number. But i can't see anything that > says set a '0' more in front of the dialed extension. While this may look o little odd, this is really the expected behaviour. You can change the number format on PRI channel by setting pridialplain in /etc/astersik/zapata.conf. The pridialplan setting goes into the 'type of number' field. Apparently, your numbers are treated as 'national'. You could try to change pridialplan to 'local', if you want to dial numbers the same way you do on an analog line (and your telco supports it). You can turn on pri debugging and take a look at the setup messages to find out what you are signalling to your telco. If there is a whishlist, it would be very helpful to set the TON/NPI fields on a per call basis rather than haveing a global setting. Has anybody done that yet? Thilo _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
