Dear Telcotype Braniacs, I have tried doing a google search to find out what this switch looks like, what the physical interface is, but havn't been successful. I am quite new to the ISDN world so I'm not sure what to expect when I see this switch. Does anyone have any experience connecting to this switch? The following is basically all I have been given for info:
1) Ericsson, AXT121, interface ETCST (ROF 137 2764/2 rev R3A), Euro-ISDN. Connected to FMV test network. 2) Subscriber normally synchronised (sync) from network. 3) 2,048 Mbit, 32TS-PCM, CCS in TS16. 4) HDB3, 75 ohm coax. 5) CRC check enabled. Like I said, I am new to the ISDN world, my digium card has an RJ45 connection type, what do I need to physically connect to the above mentioned switch? I presume my zaptel configuration will be: span=1,1,0,ccs,hdb3,crc4 bchan=1-15 dchan=16 bchan=17-31 loadzone=uk (not sure whether this is correct for sweden?) defaultzone=uk and for zapata: switchtype=euroisdn signalling=pri_net context=inc-e1 (or default...) channel=1-15,17-31 Regards, Sean Langley, P.Eng _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
