Regards, Steve
Martin Pycko wrote:
Also try to see the debug on the console (edit /etc/asterisk/logger.conf and put console => .....,debug) and restart asterisk in the console (-c)
Then you should see what telco sends us. It might be that they use some diffrent standard than *ANI*DNIS* and sometimes instead of * they use #.
regards Martin
On Wed, 3 Sep 2003, Paulo Mannheimer wrote:
Hi,
I'm testing an E1 with E&M signaling. Some of the problems I'm running into are the following:
1) if I try to configure any channel above channel 15, I start getting a "multiframe alignment error" on my telco test equipment. So I have my zaptel file only configured for 15 channels, like this
span=1,1,0,cas,hdb3 e&m=1-15
2) When the test equipment tries to send me a DTMF string, I only get the first one.
Any thoughts?
Best,
PauloHM
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
