Hi,
Ok, the phones are working and seem to be loading the correct info from the tftp server. However, I am unable to make them perform any functions (calling another extension, going to voicemail, etc.). I do not have any telephony interface installed yet, only a single ethernet card. Do I need to install the ztdummy driver to make any of this work? And if so, how do I do that?
Thanks,
Travis Microserv
My config stuff was just for the Cisco 7960 part of it. You will still need to configure extensions and such in Asterisk.
I usually do something like this, assuming sip.conf is using [1000] and the context is set to local for your SIP phone.
/etc/asterisk/extensions.conf: At the top: PHONE1000=SIP/[EMAIL PROTECTED]
Later in the file:
[local]
exten => 1000,1,Dial(${PHONE1000},20)This let's me easily change where extension 1000 rings. The SIP/[EMAIL PROTECTED] just tells Asterisk to call line '1000' at the device that is in sip.conf under [1000], which is needed on a Cisco IP phone, particularly if you have multiple lines configured.
-Andrew
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
