Ajit Kallingal wrote:
Hello
After having installed my X100P, /proc/pci and /proc/interrupts dosent
locate them.
In my PCI list is it the Communication controller: Tiger Jet Network Inc ?
then is dosent have a IRQ listed in /proc/pci..
All help appreciated
Thanks and Regards
Ajit
===========================/proc/pci==================================
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 33).
Master Capable. Latency=64.
Non-prefetchable 32 bit memory at 0xf4000000 [0xf7ffffff].
Bus 0, device 0, function 1:
IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 208).
Master Capable. Latency=16.
I/O at 0xffa0 [0xffaf].
Bus 0, device 1, function 0:
ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 (rev 0).
Bus 0, device 1, function 1:
Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100
Ethernet (rev 131).
IRQ 5.
Master Capable. Latency=64. Min Gnt=52.Max Lat=11.
I/O at 0xd800 [0xd8ff].
Non-prefetchable 32 bit memory at 0xf3ffc000 [0xf3ffcfff].
Bus 0, device 1, function 3:
USB Controller: Silicon Integrated Systems [SiS] 7001 (#2) (rev 7).
IRQ 11.
Master Capable. Latency=64. Max Lat=80.
Non-prefetchable 32 bit memory at 0xf3ffe000 [0xf3ffefff].
Bus 0, device 1, function 2:
USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 7).
IRQ 11.
Master Capable. Latency=64. Max Lat=80.
Non-prefetchable 32 bit memory at 0xf3ffd000 [0xf3ffdfff].
Bus 0, device 1, function 4:
Multimedia audio controller: Silicon Integrated Systems [SiS] SiS PCI
Audio Accelerator (rev 2).
IRQ 10.
Master Capable. Latency=64. Min Gnt=2.Max Lat=24.
I/O at 0xda00 [0xdaff].
Non-prefetchable 32 bit memory at 0xf3fff000 [0xf3ffffff].
Bus 0, device 1, function 6:
Modem: Silicon Integrated Systems [SiS] 56k Winmodem (Smart Link
HAMR5600 compatible)
(rev 160).
IRQ 10.
Master Capable. Latency=64. Min Gnt=52.Max Lat=11.
I/O at 0xde00 [0xdeff].
I/O at 0xdc00 [0xdc7f].
Bus 0, device 2, function 0:
PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP (rev 0).
Master Capable. No bursts. Min Gnt=8.
Bus 0, device 11, function 0:
Communication controller: Tiger Jet Network Inc. Model 300 128k (rev 0).
IRQ 11.
Master Capable. Latency=64. Min Gnt=1.Max Lat=128.
I/O at 0xd600 [0xd6ff].
Non-prefetchable 32 bit memory at 0xf3ffb000 [0xf3ffbfff].
Bus 1, device 0, function 0:
VGA compatible controller: Silicon Integrated Systems [SiS] SiS630 GUI
Accelerator+3D (rev
33).
Prefetchable 32 bit memory at 0xe0000000 [0xe7ffffff].
Non-prefetchable 32 bit memory at 0xefee0000 [0xefefffff].
I/O at 0xbc80 [0xbcff].
===========================/proc/interrupts=================================
=
CPU0
0: 48259 XT-PIC timer
1: 233 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 272 XT-PIC eth0
8: 1 XT-PIC rtc
11: 60 XT-PIC usb-ohci, usb-ohci
12: 26 XT-PIC PS/2 Mouse
14: 4516 XT-PIC ide0
15: 0 XT-PIC ide1
NMI: 0
ERR: 0
=============================================================
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
Did you 'modprobe wcfxs' ? And 'ztcfg -vv' ?
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
