On Saturday 06 September 2003 06:19 pm, Tilghman Lesher wrote: > > It complains > > [EMAIL PROTECTED] etc]# ztcfg -vv > > > > Zaptel Configuration > > ====================== > > > > > > Channel map: > > > > Channel 01: FXO Kewlstart (Default) (Slaves: 01) > > Channel 02: FXS Kewlstart (Default) (Slaves: 02) > > > > 2 channels configured. > > > > ZT_CHANCONFIG failed on channel 2: Invalid argument (22) > > Did you modprobe wcfxo or wcfxs first?
As per the only directions digium sent me, modprobe wcfxo was first > If you did modprobe wcfxo > first, then your channel definitions are backwards. It's also possible > that you forgot to modprobe one or the other, in which case the second > card will certainly not be detected. No, modprobe wcfxs was after the modprobe wcfxo as per digiums supplied instructions > See the output of 'lsmod' to see > if either is not loaded. wcfxo 9440 0 (unused) wcfxs 19168 0 (unused) zaptel 182880 0 [wcfxo wcfxs] > Also possible is that your lack of connecting > the power connector may make your computer unable to detect the > TDM400. That's connected > > [EMAIL PROTECTED] asterisk]# asterisk -vvvr > > ERROR[16384]: File asterisk.c, Line 1323 (main): Unable to connect to > > remote asterisk > > > > Hmm...that wasn't happening before I did the build using the supplied > > disc. > > You can only remote connect (-r) if an instance of Asterisk is already > running. Drop the -r if not (and possibly add -c, for console). > -Tilghman Do have the correct install disk ? -- Power is the finest token of affection. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
