Just stumbled across the problem noted in my original post below. I added: allow=ulaw allow=ilbc
to sip.conf instead of the recommended 'allow=all' and now all phones work. Can someone help me understand this? (It would appear, based on my very much lack of experience, that * was attempting to set up the conversation using g723, when all of the phones have 'default=ulaw' definitions. Should I leave the ulaw definition for future production use, or is this really something that I did to read/learn more about for a very small office use?) Rich ------------------------ > Can someone offer a hint on what I'm doing wrong with the basic * config? > > Just implemented * for the first time using yesterday's cvs. The initial > configs are based on John Todd's article at http://www.onlamp.com/lpt/a/3956, > and using two 7960's for initial testing. When one 7960 calls the other, I > get the following and the call is dropped: > > -- Executing Dial("SIP/3001-ec1c", "SIP/3000|20") in new stack > -- Called 3000 > -- Got SIP response 488 "Not Acceptable Here" back from 206.222.193.92 > == No one is available to answer at this time > -- Executing VoiceMail("SIP/3001-ec1c", "u3000") in new stack > == Parsing '/etc/asterisk/voicemail.conf': Found > -- Playing 'vm/3000/unavail' > > My sip.conf looks like: > [general] > > port = 5060 ; Port to bind to (SIP is 5060) > bindaddr = 0.0.0.0 ; Address to bind to (all addresses on machine) > allow=all ; Allow all codecs > context = bogon-calls ; Send SIP callers that we don't know about here > > [3000] > type=friend ; This device takes and makes calls > username=3000 ; Username on device > secret=npi2003 ; Password for device > host=dynamic ; This host is not on the same IP addr every time > context=from-sip ; Inbound calls from this host go here > mailbox=100 ; Activate the message waiting light if this > ; voicemailbox has messages in it > > [3001] > type=friend ; This device takes and makes calls > username=3001 ; Username on device > secret=npi2003 ; Password for device > host=dynamic ; This host is not on the same IP addr every time > context=from-sip ; Inbound calls from this host go here > mailbox=100 ; Activate the message waiting light if this > --------------------------------------- > > and my extensions.conf looks like: > > [general] > static=yes ; These two lines prevent the command-line interface > writeprotect=yes ; from overwriting the config file. Leave them here. > > [bogon-calls] > exten => _.,1,Congestion > > [from-sip] > exten => 3000,1,Dial(SIP/3000,20) > exten => 3000,2,Voicemail(u3000) > exten => 3000,102,Voicemail(b3000) > exten => 3000,103,Hangup > > exten => 3001,1,Dial(SIP/3001,20) > exten => 3001,2,Voicemail(u3001) > exten => 3001,102,Voicemail(b3001) > exten => 3001,103,Hangup > > exten => 3999,1,VoicemailMain(${CALLERIDNUM}) > > Apparently I'm doing something wrong, but since this is my first attempt > at making * work, I don't actually have a clue what I'm doing (yet). > > Asterisk did complile and install clean the first time (on new RH9 system), > and both 7960's are registered. In some attempts to dial, I do receive > vmail announcements, etc, so whatever I've done wrong I'm guessing it must > be in the above config statements. > > If someone would kindly point out my error (and maybe a constructive comment > about the error so I can learn), if would be greatly appreciated. > > TIA, > Rich > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users ---------------End of Original Message----------------- _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
