If it fits, it'll work. Generally motherboards with 64-bit slots and most DELL's including the 600SC work fine.
Look closely at the two edge connectors in these pics: - http://digium.com/images/wildcard_te410p.jpg - http://digium.com/images/wildcard_t400p.gif
You'll notice that the T400P has two gaps in the edge connector, whereas the TE410P only has one (nearest the ports).
I.e. 3.3V PCI slots have the longer part of them closest to the rear of the machine, and 5V slots have the shorter part closest to the rear.
The following motherboard has both types of slots, with the 5V ones to the right, and the longer 3.3V 64-bit PCI-X slots to the left.
- http://www.supermicro.com/PRODUCT/MotherBoards/E7505/X5DA8.htm
Note that it seems to be possible to get non-64-bit 3.3V slots, like on this board, which looks like it has one:
- http://www.supermicro.com/PRODUCT/MotherBoards/VIA/P3TDDE.htm
Annoyingly, no-one seems to make 3.3V PCI motherboards for P4s, it's pretty much Xeon-only.
When I spoke to TelAppliant when ordering one of their last E400Ps, they seemed to think that Digium has plans to produce a 5V version of the TE410P, but that it won't be ready "for a few months". Can anyone confirm or deny this?
-- Alastair Maw <[EMAIL PROTECTED]> MX Telecom - Systems Analyst http://www.mxtelecom.com
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
