Yes, depending on the channel bank. GENERALLY, people can have problems with FXS ports on channel banks (no FSK while on hook, etc), but not usually with FXO ports, it would depend on the channel bank. You want your channel bank to support callerID (for your country) and support disconnect supervision (for your country).
On Mon, 2003-09-08 at 10:19, Dan wrote: > ----- Original Message ----- > From: "Daryl G. Jurbala" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Monday, September 08, 2003 4:38 PM > Subject: RE: [Asterisk-Users] Maximum number of X100P cards in the same * > box > > > > It sounds like a channel bank and an E1 or T1 card in your * box would > > be a better way to go. (analog lines to the channel bank, which muxes > > them to an E1 or T1). That way you have have fewer cards in your * box, > > fewer interrrupts to poll, fewer things to go wrong. > > > > Channel banks are arguable much more reliable than PCs and PC hardware. > > > > Just a thought...might not be possible depending on your setup. > > The problem is that I want to have the full functionality of an X100P card. > It is possible with a CB? > > Thanks, > Dan > > > > > > > > > > > > > > > > > Daryl > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users -- BTEL Consulting 850-484-4535 x2111 (Office) 504-595-3916 x2111 (Experimental) 877-552-0838 (Backup Phone) _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
