Hi thanks for your reply, I have plugged in a E1 trunk to my E100P card and there is flashing red light. The E1 has no signalling, it has not been configured yet at the provider side. In this scenario, would I get a green light or flashing red?
By the way what is red alarm? is it a E1 terminology? ----- Original Message ----- From: "Mark Spencer" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, September 10, 2003 10:06 PM Subject: Re: [Asterisk-Users] LEDs on E100P card > One is a bicolor LED which indicates: > > off - span not configured / driver not loaded > green - OK > red (flashing) - RED Alarm > yellow - Yellow Alarm > > The second is an orange LED which indicates a loopback (local or remote) > is up for testing purposes. > > Mark > > On Wed, 10 Sep 2003, Chee Foong wrote: > > > Hello, > > > > There are 2 leds at the back of the E100P card. I search the mailing list and digium website. There seems to be no documentation about them. > > > > On the card itself, 1 led is labeled D1 and the other is labled D2. > > > > Can someone explain or point me to the right resources about these leds. > > > > Thanks > > > > Foong > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
