> -----Original Message----- > From: Howard White > Sent: Wednesday, September 10, 2003 2:35 PM > > <bottom response = on> > > On Tue, 2003-09-09 at 12:41, Robert Boardman wrote: > > I have an ISDN TA that has 2 POTS interfases (FXS), can > these be used > > with asterisk? > > > > Thanks in advance > > > > Robb > > Yes, I have two such installations. Be advised there are > some gotchas. > > My TAs are older Ascend/Lucent/??? Pipeline 75s which have different > tones for off-hook and error conditions that * is not always > prepared to > listen to. I get voicemail messages with four minutes of P75 off-hook > every now and then. I am sure that patches could be applied to solve > these issues but I choose to live with it as is. > > No show stoppers, you understand, just oddities every so often. > > Howard White >
Howard, I think the OP wanted to go in the other direction... Which I would assume is possible, as long as you also have an ISDN/CAPI card for linux that can be put into NT mode rather than TE mode. I don't know how this would be wired up, but I would imagine something special may need to be done with regards to U vs. ST interfaces, or it may be as simple as crossing the T/R pair and letting them go. Take this all with a grain of salt though, I'm far from an expert on BRI. -- Troy Settle Pulaski Networks http://www.psknet.com 540.994.4254 ~ 866.477.5638 Pulaski Chamber 2002 Small Business Of The Year _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
