Use oh323. Download the openh323 and pwlib tarballs from openh323.org
Follow Jeremy's instructions in the /asterisk/channels/h323/ directory EXACTLY! good luck Regards, Sean Langley, P.Eng Firmware Engineer General Dynamics Canada (403)730-1482 [EMAIL PROTECTED] > -----Original Message----- > From: Senad Jordanovic [mailto:[EMAIL PROTECTED] > Sent: Friday, September 12, 2003 8:18 AM > To: [EMAIL PROTECTED] > Subject: [Asterisk-Users] h323 v oh323 > > > I have been reading archive post in regards to h323 support, > and I am not > clear on this: > > 1. > Is h323 enabled and ready to use if one compiles asterisk, > zaptel and libpri > (as shown on asterisk.org) ? > > 2. > If it is, is it h323 or oh323? > > 3. > If it is not, does one just need to follow instructions in > /asterisk/channels/h323/ > in order to get it enabled. > > 4. > I have an Ericsson webswitch 100 G4 (4 FXO ports). Once h323 is > enabled/configured > in *, WHY there is no any authentication needed on Ericsson > box for placing > the calls? > I presume, that when Ericsson, "assigns" LAN IPs, that only > those boxes can > communicate with it? > Is that correct? > > > Thanks > > > Senad > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
