Does anyone have a MAX/APX with working ingress PRI calling name? I recently acquired a MAX TNT on the cheap and it's integrating fine except for one thing. In the 11.0.0 release notes, it is stated that ISDN calling name will, if present and permitted by presentation flags, be added to the From: and Remote-Party-ID: headers of the INVITE. I'm not able to make this happen. Pcap captures show it is indeed in neither header, and I suspect the MAX is sending the INVITE before it receives this data. Debug traces show it does receive the message, but due to limitations of the CLI, I cannot correlate whether it's received before or after the INVITE is dispatched. It works great direct to Asterisk (of course) via TE410P on the same NI-2 spans.
My FACILITY message that contains the CNAM wanders in from 100 to 400ms after the initial SETUP. I can't seem to find any way to get the MAX to stall for a half-second before invoking the INVITE (if that's even the issue). Is my provider too slow? Is there another valid way for CNAM to be provided during the SETUP message, assuming my provider can stall the call setup until the SS7 query is returned? (google for Q.931 docs not helping me much there either) I know this isn't the place for Ascend/Lucent MAX discussion, but there doesn't seem to be anything active out there. I'm looking for a mail list/newsgroup/community if there is one still alive. _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users