If you've followed the advice of previous posters, delete your 7-4 firmware and re-extract it. You should NOT rename it.
Your OS79XX.txt should contain P003-07-3-00 and your SIPMAC.cnf should contain # SIP Configuration Generic File (start) image_version: P0S3-07-4-00 The P003-07-3-00 is the loader file the loader file loads the actual image which is the P0S3-07-4-00 Louie -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Patrick Lidstone (Personal E-mail) Sent: Thursday, June 23, 2005 3:30 PM To: [email protected] Subject: [Asterisk-Users] Re: Cisco 7960 firmware upgrade promblems > Make sure that you have done the following: > > 1.) Set up the phone to use DHCP to get an address *or* manually > configured an e-mail address using the settings on the phone. > > 2.) Set the DHCP server to give out the correct TFTP server address, > *or* configure "Alternate TFTP Server" = yes and manually specify the > server address. > > I assume that you have already done that, but you never know! > > Tom Hi Tom, the problem is that the Universal Application Loader has never successfully loaded a firmware image, so there is no way to set these options manually. The phone is definitely doing something with DHCP, but never generates a TFTP request - apparently? Patrick _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
