I'm a newbie, not afraid to admit it. I tried to install my TDM400P without the auxilliary (drive) power connection and got this failure when loading the wcfxs module:
Freshmaker version: 63 Freshmaker passed register test ProSLIC on module 0 failed to powerup within 510 ms Unable to do INITIAL ProSLIC powerup on module 0 Module 0: Not installed Module 1: Not installed Module 2: Not installed Module 3: Not installed A search of the archives turned up nothing, so hopefully it will show this message now. :) Apparently, this is what happens if a power cable is not connected to the side of the card. I added that connection, and now it probes normally: Freshmaker version: 63 Freshmaker passed register test Module 0: Initialized Module 1: Not installed Module 2: Not installed Module 3: Not installed Found a Wildcard FXS: Wildcard TDM400P REV E (4 modules) Registered tone zone 0 (United States / North America) There was probably a memo somewhere explaining the power socket, but I didn't get it. -Steve _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users