Router#conf term Router(config)#voice class codec 99 Router(config-class)#codec preference 1 g711ulaw Router(config-class)#codec preference 2 g729br8 Router(config-class)#codec preference 3 g729r8 Router(config-class)#end
Router(config)#dial-peer voice 2000 voip Router(config-dial-peer)#voice-class codec 99 Router(config-dial-peer)#^Z -Greg On Thu, 2005-06-30 at 10:22 -0400, Brian C. Fertig wrote: > Does anyone in here know how to setup auto negotiation between g729 and > g711ulaw on > a cisco 5400? I would imagine it would be the same on a 3660. > > The problem I am having is natively the call is setup for g729 however > when the call is transferred > to voicemail it uses ULAW so when the cisco tries to connect to the > voice mail I get a SIP error > that the codec couldn't be negotiated. I need a little in sight on how > to setup the dial peer or > something in the global config for the router. > > > TIA > > ..o-------------------------------------------------------o. > Brian Fertig > NOC/Network Engineer > Planet Telecom, Inc. > Tampa, FL Office > > > > > > This email was scanned by: Mcafee GroupShield > ---------------- CONFIDENTIAL DISCLAMER ---------------- > All information provided in this email is considered confidential > and proprietary of Planet Telecom, Inc. and Telecenter Inc. > Use of this information by anyone other than the recipient or > sender will be considered in breach of agreement. > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
