Matthew Boehm wrote:
Damon Estep wrote:
Dear All,
I am using Linux-High Availability between two Asterisk servers,
everything is fine but I do have one problem with
this, When a server fails and the other assumes the ip address and
start asterisk on server 2, the ip phone must
re-register themselves again, otherwise the phones are dead.
Does anyone have Ideas of how to overcome this.
SIP RealTime should solve this problem.
If both machines use SIP RealTime then it doesn't matter which server
the phone registers to cause if the other server recieves a call for
the phone, it will lookup in the db how to contact that phone.
-Matthew
Interesting, but I'm using realtime right now, and even though the sip
phones register, the realtime db for each sip device is not updated with
any location information.
-Chris
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
