(I am looking for a
cheat sheet - or good documentation for Audiocodes MP-1xx series and
*)
I am a newbie *
user.
I am using this as
FXO
(Bridge from analog
POTS lines to IP (I think I used the correct terminology) (basically they are
incoming phone lines from my phone company))
I purchased an
Audiocodes MP-108 and have been able to get it to boot and get to the config
screen.
(Which was a project
- I will document it on voip-info)
However, I am
guessing at setting up anything more than the IP address section of the
MP-1xx.
I have firmware
version:
4.20.354.571
I set it up to use
the SIP (through bootp configuration files)
I set my SIP section
to be:
Gateway Name:
axxx.mydomain.com
Working with Proxy:
Yes
Proxy IP
Address:
(The IP address of my * box)
Enable Registration:
Yes
(For the most part I
guessed at the above section)
I left the rest of
the configuration as the default.
I did however -
change the password :)
If I could get some
pointers as to the proper config - that would be very
helpful.
Also - what do I do
now? -- Sorry for the total newbie question.
I would like to plug
a phone line into the FXO and then go to * and configure so it knows to connect
to my audiocodes etc.... - but I am not finding docs on how to do so. At least I
should say - I can not find anything related to audiocodes. (Maybe the vendor
does not matter)
Thanks in advance
for your help,
-John
John David Sundberg
235 East
6th Street, Suite 400B
St. Paul, MN 55101
(651) 695-8566-work
(651)
247-6766-cell
(651) 695-8577-fax
[EMAIL PROTECTED]
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
