On Thu, 2005-06-30 at 10:49 -0500, Guillermo Salas M wrote: > On Thu, 2005-06-30 at 10:53 -0400, John Novack wrote: > > Guillermo Salas M wrote: > > > > >On Thu, 2005-06-30 at 16:33 +1000, Terry H. Gilsenan wrote: > > > > > > > > >> > > >> > > >> > > >>>-----Original Message----- > > >>>From: [EMAIL PROTECTED] > > >>>[mailto:[EMAIL PROTECTED] On Behalf Of > > >>>Jamie Carl > > >>>Sent: Thursday, 30 June 2005 2:48 PM > > >>>To: Asterisk Users Mailing List - Non-Commercial Discussion > > >>>Subject: Re: [Asterisk-Users] X100P connected as extension to > > >>>Panasonic 616EASA-PHONE > > >>> > > >>>So what you're saying is, you can make inbound/outbound calls on > > >>>asterisk using an X100P connected to the PSTN. Then you unplug the > > >>>X100P from the PSTN and plug it into a Panasonic 616 PABX and > > >>>suddenly nothing works? Is that correct? > > >>> > > [..] > > > >I think you'll find the Panasonic box needs some attention... > > >>> > > >>> > > You need to determine why the X100 is off hook, resulting in your > > Panasonic returning busy. > > Station ports on the 616 are POTS FXS, so it is correct to do what you > > are doing, but for some reason the X100 is off hook. > > Make sure you are connected to the line rather than the phone port on > > the X100, also make sure you are using a two wire cord from the > > Panasonic, as the 2nd pair is for Prop Panasonic phones data/power. > > > > Thank you for you response, I've conected to the LINE port of the X100P > I think the problem is because I'm using a 4 wire cord :( > > I'll be changing the cord. >
Yes ... it works. I've changed the cord for one with 2 wire. Thank you very much for the help. > > Can you ring the extension with the X100 unplugged? > > > > If not, then either a bad station port or a bad cord. > > > > Best of luck > > > > John Novack > > > > >>Actually, I think the problem is that when you plug in the Panasonic, you > > >>have two FXO devices connected together, and well that is just not going > > >>to > > >>work. > > >> > > >> > > >> > > > > > >I'm a litle bit confused, the CO on the Panasonic are FXO (because the > > >PSTN is connected there) and the internal extensions are FXS (I`ve > > >phones FXO connected to the extensions), it is right? > > > > > >If the X100P is FXO, then I can connect to the internal extensions (like > > >a phone)? > > > > > >Thank you for the help. > > > > > > > > > > > >>It might be a good idea to read this: > > >> > > >>http://www.digium.com/index.php?menu=fxsvfxo > > >> > > >>T > > >> > > >> > > >> > > >> > > >>>Jamie > > >>> > > >>> > > >>>Guillermo Salas M wrote: > > >>> > > >>> > > >>> > > >>>>Hi all. > > >>>> > > >>>>I`ve installed a X100P on my box and is working well with > > >>>> > > >>>> > > >>>incoming and > > >>> > > >>> > > >>>>outgoing calls as a trunk with one PTSN line. > > >>>> > > >>>>I want to connect the X100P to my Panasonic 616 EASA-PHONE as an > > >>>>internal extension to permit to users to make calls to SIP > > >>>> > > >>>> > > >>>devices from > > >>> > > >>> > > >>>>analog phones, the problem is when I dial the ext number where the > > >>>>X100P is connected I get busy tone. > > >>>> > > >>>>What config I need to change to my asterisk files to permit the > > >>>>commented in the last paragraph? > > >>>> > > >>>>Best Regards, > > >>>> > > >>>> > > >>>> > > >>>> > > > > _______________________________________________ > > Asterisk-Users mailing list > > [email protected] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users -- Guillermo Salas M. Telconet S.A. Manta Calle 15 y Av. 24 Esq. Phone : 593 5 262 8071 Mobile: 593 9 985 5138 SIP : [EMAIL PROTECTED] e-mail: [EMAIL PROTECTED] www : http://www.telconet.net http://www.telcocarrier.net Linux User: 255902 Soporte en Linea en http://www.manta.telconet.net Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
