We have some guys working in the US who can't always dial back to our company in Europe easily (lots of clients require authorization to make international calls), so I set up the following:
- ipkall.com number links to a FWD number - office Asterisk box registers with FWD Then I programmed Asterisk to accept office extension number using DTFM tones. This works OK. Then I programmed Asterisk so that it is possible, using a PIN code, to dial out from Asterisk onto the local PSTN. This also works occasionally. Looking at the message from the Asterisk box it is clear that sometimes numbers are missed or repeated in the dial string. This I suspect is because Asterisk is listening to the DTMF tones but the signal is dropped; sometimes the drop means that a whole digit is dropped and sometimes is means that a digit is repeated. Does anyone know how I can fix this to make it more reliable (out-of-band DTMF?) or a better way to achieve a reliable setup? _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users