Ok, after hours of research I finally found the problem. I found a
document from digium at
http://www.digium.com/asterisk_handbook/zapata.conf.html
which states that everything above the channel=x statement applies
to that interface which seems a little backwards to me. After
reconfiguring I have
context=internal
signalling=fxo_ks
callerid="Keith" <100>
channel=1
context=pstn-in
signalling=fxs_ks
callerid=asrecieved
channel=4
Just in case anyone else has the same problem.
Keith
On Jul 1, 2005, at 10:35 PM, Keith Caldwell wrote:
I just downloaded the latest asterisk and zaptel from cvs and I'm
having trouble setting the callerid on the fxs interface. From what
I've read you should be able to set it in the zapata.conf but I
can't get it to work. I had a cheap X100P clone but recently bought
the Dev Kit PCI . I've built a seperate server and have everything
up and running except everytime I go to check my voicemail I have
to enter my extension each time. Here is the exten for voicemail
that I have set up.
[vmail-main]
exten => 580,1,Wait,1
exten => 580,2,Answer
exten => 580,3,VoiceMailMain([EMAIL PROTECTED])
exten => 580,4,Wait,2
exten => 580,5,hangup
I've set up a test extension that will say cid
exten => 222,1,Wait,2
exten => 222,2,SayDigits(${CALLERIDNUM})
exten => 222,3,Hangup
It works with a sip soft phone I've tested it with.
Here is the zapata.conf
[channels]
busydetect=no
musiconhold=default
transfer=yes
cancallforward=yes
usecallerid=yes
echocancel=yes
echocancelwhenbridged=yes
echotraining=yes
immediate=no
context=internal
signalling=fxo_ks
channel=1
context=pstn-in
callerid="Keith" <100>
signalling=fxs_ks
channel=4
callerid=asrecieved
Any Idea what I'm doing wrong?
Keith
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
