Hi Nicolás,
Thanks for all your assistance. How are you keeping ?
Unfortunately I'm still battling with this one:
Since we've chatted the driver developer of the Sirrix board has now
configured the driver so that channel names are now displayed as:
Srx/gout-0000-01
Srx/gout-0001-01
etc. In other words, channels now have static names.
I've tried this in my op_buttons.cfg but the buttons do not change their
state, i.e. go red when in use.
This is what I have in my op_buttons.cfg:
[Srx/gout-0000-01]
Position=n
Label="External"
Extension=-1
Icon=2
I've tried running op_server with debug set to "1" and the channels
definitely shows up as "Srx/gout-0000-01" etc.
Any ideas ?
Many thanks.
Kindest regards
David Wilson
_______________________________
D c D a t a
Tel +27 33 342 7003
Fax +27 33 345 4155
Cell +27 82 4147413
http://www.dcdata.co.za
[EMAIL PROTECTED]
Powered by Linux, driven by passion !
_______________________________
"Computers are not intelligent. They only think they are."
----- Original Message -----
From: "David Wilson" <[EMAIL PROTECTED]>
To: "Nicolás Gudiño" <[EMAIL PROTECTED]>
Sent: Thursday, June 30, 2005 9:10 AM
Subject: Re: [Asterisk-Users] Monitoring Sirrix quad BRI channels
Hi Nicolás,
I haven't tried your solution yet. There has just been a new version of
the Sirrix drivers release will allow static names for each port and
channel.
Problem solved !
Thanks anyways.
Kindest regards
David Wilson
_______________________________
D c D a t a
Tel +27 33 342 7003
Fax +27 33 345 4155
Cell +27 82 4147413
http://www.dcdata.co.za
[EMAIL PROTECTED]
Powered by Linux, driven by passion !
_______________________________
"Computers are not intelligent. They only think they are."
----- Original Message -----
From: "Nicolás Gudiño" <[EMAIL PROTECTED]>
To: "David Wilson" <[EMAIL PROTECTED]>
Sent: Monday, June 27, 2005 4:14 PM
Subject: Re: [Asterisk-Users] Monitoring Sirrix quad BRI channels
Hello,
Sounds interesting ! Any ideas on how to do that ? :)
From your messages I don't know what are the actual channel names
being used. Are they Zap/08XXXX? In that case, you can write something
like this in op_buttons.cfg
[_ZAP/.*]
Position=1-8
Label='Sirrix"
Icon=2
etc, etc
>
> The "Flash Operator Panel" requires that we set a static value for each
> line
> or channel. With analogue cards its easy as the lines are Zap/1, Zap/2,
> Zap/3 etc. With the Sirrix board the value seems to change: 0814f1f8,
> 08129f38, 0837ad40.
>
> Is there anyway I can get this right so that each channel (8 of them)
> can
> be
> monitored ?
You can try by using regexp to match the channel name, prefix it with
an underscore and then a perl regexp pattern. Regards,
--
Nicolás Gudiño
Buenos Aires - Argentina
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
