Hi Joseph, here is how i did it:
iax.conf of server1: [server2] type=friend auth=md5 username=server1 secret=<secret> context=default host=dynamic defaultip=<public ip of server2> deny=0.0.0.0/0.0.0.0 permit=<public ip of server2>/255.255.255.255 disallow=all allow=g729,gsm iax.conf of server2: [server1] type=friend auth=md5 username=server2 secret=<secret> context=default host=dynamic defaultip=<public ip of server1> deny=0.0.0.0/0.0.0.0 permit=<public ip of server1>/255.255.255.255 disallow=all allow=g729,gsm extensions.conf of server1: exten => _2X.,1,Dial(IAX2/server2/${EXTEN:1},30) extensions.conf of server2: exten => _1X.,1,Dial(IAX2/server1/${EXTEN:1},30) use "deny" and "permit" only with later versions than 1.0.5 of asterisk (best with CVS HEAD) i hope this helps.... best regards, Roland Zagler -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Joseph Sent: Monday, July 04, 2005 12:54 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] Connecting two servers - dial string Scenario: Both boxes are behind firewall, port udp 4569 is open. If I don't want the username and password in dialing string do I have to use register statement in IAX.CONF. Can anybody post some working samples; I have a hard time making it to work with the samples posted on wiki. -- #Joseph _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users