On Sun, 2005-07-03 at 17:36 -0600, Rich Adamson wrote: > > [snip] > > > Below is an example of a working type=user and type=peer without > > > the register statement prior to livevoip going bankrupt. > > > > > > ;[livevoip] ; for incoming calls from LiveVoIP.com > > > ;type=user ; used for Incoming calls > > > ;secret=mysecret-in > > > ;deny=0.0.0.0/0.0.0.0 > > > ;permit=217.160.244.186/255.255.255.0 > > > ;context=livevoip-in > > > ;disallow=all > > > ;allow=gsm > > > ;trunk=no > > > > > > ;[livevoipout] ; for outbound calls via LiveVoip.com > > > ;type=peer ; used for outgoing calls > > > ;host=217.160.244.186 > > > ;username=myuserid > > > ;secret=mysecret > > > ;disallow=all > > > ;allow=gsm > > > ;trunk=no > > > > Do you have an example how the dialing string will look like? > > I think when dialing I will need to put password in dialing context, > > isn't it? > > exten => exten => 888,1,Dial(IAX2/livevoip:[EMAIL PROTECTED]/${EXTEN,1}) > > Using the above example, your dialing string would be like: > exten => 888,1,Dial(IAX2/livevoipout/${EXTEN,1}) > and if you wanted to change codecs (or several other parameters), you > simply do it in the [livevoipout] section, not in all the appearences > of the exten => dialstring. Doing it this way, the password only appears > within the context, not all the exten dialstrings.
I'm trying to make a connection one way first from Box-A to Box-B I still get an error: Call rejected by 68.xxx.xx.255: No authority found ???? This setting I have in the iax.conf of the box that makes the call out Box-A: [livevoipout] ; for outbound calls via LiveVoip.com type=peer ; used for outgoing calls host=68.xxx.xx.255 username=myuserid secret=mysecret disallow=all allow=ulaw ;trunk=no extension.conf exten => 888,1,Dial(IAX2/livevoipout/${EXTEN,1}) On the box that accepts the call Box-B: [livevoip] ; for incoming calls from LiveVoIP.com type=user ; used for Incoming calls secret=mysecret deny=0.0.0.0/0.0.0.0 permit=205.xxx.xx.103/255.255.255.240 context=office-closed disallow=all allow=ulaw What is wrong with my setting? -- #Joseph _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users