Hi
I've got a similar problem.
Asterisk 1.0.7 running on Dual Opeteron smp Suse linux.
Zaptel taken from CVS yesterday with USE_RTC enabled (no Zaptel hardware)
With three users on a conference I see about a 1/2 second delay, it like
having a call across a satellite link.
'iax2 show peers' shows a max lag of 18ms per channel, max jitter 12ms
two channels using GSM codec, third using iLBC.
During the test there were no other channels in use.
Any ideas?
Cheers
Giles
----- Original Message -----
From: "Rob Thomas" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<[email protected]>
Sent: Monday, June 27, 2005 12:26 PM
Subject: RE: [Asterisk-Users] Re: Horrible MeetMe performance
If you have Zaptel cards, does setting the build to USE_RTC use that
timing source in preference to the Zaptel card interrupts?
If you have a zaptel card, you shouldn't be loading ztdummy. So,
therefore, no problems!
--Rob
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
This message has been scanned for viruses and
dangerous content by Swift Internet, and is
believed to be clean.
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
