RE: [Asterisk-Users] Asterisk on Linksys WRT54G

Florin Mandache Wed, 06 Jul 2005 02:38:21 -0700

Check that both sides use the same codec. I had the same problem before L

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Damon Estep
Sent: Tuesday, July 05, 2005 4:36 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Asterisk on Linksys WRT54G

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Walid Azab
Sent: Tuesday, July 05, 2005 4:23 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [Asterisk-Users] Asterisk on Linksys WRT54G

Hi all,

Any one tried installing Asterisk on Linksys WRT54G? We have but facing problems with SIP to SIP calls. The phones ring and calls are established but we cannot hear any voice at all. I tried allow=all in the general section but did not work. So I forced ulaw. Can any one please check it out and let me know what is wrong?

Here are the conf files:

Asterisk Version: Asterisk CVS-HEAD-01/17/05-00:35:58 built by [EMAIL PROTECTED] on a i686 running Linux

==>SIP.CONF

[general]

port = 5060           ; Port to bind to (SIP is 5060)
bindaddr = 0.0.0.0    ; Address to bind to (all addresses on machine)
disallow=all             ; Allow all codecs
allow=ulaw
context = bogon-calls ; Send SIP callers that we don't know about here

[2000]

type=friend           ; This device takes and makes calls
username=2000         ; Username on device
secret=1234           ; Password for device
host=dynamic          ; This host is not on the same IP addr every time
context=from-sip      ; Inbound calls from this host go here
mailbox=100           ; Activate the message waiting light if this
                      ; voicemailbox has messages in it

[2001] ; Duplicate of 2000, except with different auth data

type=friend
username=2001
secret=1234
host=dynamic
context=from-sip
mailbox=101

==>Extensions.conf

[general]

static=yes
writeprotect=yes

[bogon-calls]

exten => _.,1,Congestion

[from-sip]

exten => 2000,1,Dial(SIP/2000,20)

exten => 2000,2,Voicemail(u2000)

exten => 2000,102,Voicemail(b2000)
exten => 2000,103,Hangup

exten => 2001,1,Dial(SIP/2001,20)
exten => 2001,2,Voicemail(u2001)
exten => 2001,102,Voicemail(b2001)
exten => 2001,103,Hangup

exten => 2999,1,VoicemailMain(${CALLERIDNUM})

How are the routers connected to the IP network? Any nat before them on either end?

_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

RE: [Asterisk-Users] Asterisk on Linksys WRT54G

Reply via email to