forgot to include the list ---------- Forwarded message ---------- From: Blake Krone <[EMAIL PROTECTED]> Date: Jul 6, 2005 9:07 PM Subject: Re: [Asterisk-Users] Re: Remote SIP Connections To: dbruce <[EMAIL PROTECTED]>
Just had my brother connect from his time warner cable in minnesota to my adelphia in colorado springs, both NAT'd and I have my DMZ on, still nothing :( Any other ideas??? I wanted to setup an asterisk server so I could have VoIP in the house but then send SIP phones to my parents in Minnesota to save on long distance costs and cell minute usage. Thanks! On 7/5/05, Blake Krone <[EMAIL PROTECTED]> wrote: > Well I had it setup with DMZ and port forwarding, removed the port > forwards and still no luck :( > > Might end up going back to @home seen as other things like music on > hold won't work properly, maybe something is just messed up in my > gentoo install of asterisk. > > -Blake > > On 7/5/05, dbruce <[EMAIL PROTECTED]> wrote: > > You have forgotten that the WRT54G is a NAT router. > > > > The phones that are trying to connect to your server are also very likely to > > be behind a NAT router. This make it almost impossible to tell what ports > > are actually going to be used for inbound or outbound traffic... many NAT > > routers do not attach any significance to SIP protocol messages. Add to that > > the fact that many IP phones do not use the same port range for RTP that > > asterisk uses by default, and you have a VERY difficult time determining > > which port ranges need to be forwarded. > > > > Your easiest solution is to remove the forwarding rules, give your asterisk > > server a static IP address on your local network, and configure that IP > > address as the DMZ. All unsolicited requests to the router are sent to the > > IP address configured as the DMZ. > > > > The DMZ settings are found under the "Applications & Gaming" tab on the > > WRT54G. > > > > You could also play with port triggering settings, but that is also a very > > dificult process. > > > > Regards, > > Derek Bruce > > > > > > ----- Original Message ----- > > From: "Blake Krone" <[EMAIL PROTECTED]> > > To: <[email protected]> > > Sent: Tuesday, July 05, 2005 7:10 PM > > Subject: [Asterisk-Users] Re: Remote SIP Connections > > > > > > I have gotten them to be able to connect but I am unable to hear the > > other person and they can't hear me either. > > > > What else am I missing? > > > > On 7/5/05, Blake Krone <[EMAIL PROTECTED]> wrote: > > > Hello all, I have my * server setup behind a Linksys WRT54G on > > > Adelphia cable. I have forwarded 5060,10000-10020, and another port > > > set can't remember off the top of my head but I can't seem to connect > > > to the * server from any locations that are direct connects to the > > > Internet. Am I missing a portset for forwarding? > > > > > > If I use the name service (voip.*****.com) from my home connection on > > > the same LAN as the * server it will connect fine. > > > > > > Any ideas? > > > > > > TIA! > > > -blake > > > > > _______________________________________________ > > Asterisk-Users mailing list > > [email protected] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
