On Fri, 2005-07-08 at 15:19 -0400, Shawn Porter wrote: > Prospective user question” > > What is the simplest/inexpensive board to use in order to be able to > receive faxes in Asterisk. > > I have a couple of cards I bought off E-bay think they were TX-1000 > (or supposed to be anyways) > > but I assume I need some form of fax card though.
Internal cards are not worth it. >From my experience (I went through so many internal fax card etc I'm not buying them anymore), they are waist of money. - limited to one bus the current one, the bus will change in a future and your card is junk - problem sending a fax if your server which have the fax card goes down (for maintenance etc). Good solution is to buy an external fax/modem box (hardware type) connect it to FXS port and install any fax software (hylafax is good). 1.) with with setup you can fax it from any PC by dialing extension prefix of the FXS port your fax is connect it to. 2.) you can dial out on any outgoing voice line just by setting it up with your asterisk. 3.) if your fax server goes down, restart hylafax on another PC and your fax server is up and running (takes only 5sec.) 4.) you can receive fax on any incoming line in asterisk just by specifying on the incoming line : nvFaxBackgroundDetect (very nice application) 5.) and the one I like most is the ability in hylafax to control the junk faxes with "tsi" -- #Joseph _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
