Rich Adamson wrote:
Yes, the above indicates the phones did in fact register "at least
one time", as indicated by the IP address in the Host colume.
The Status = Unreachable is saying the phones no longer are
reachable by asterisk. So, either the phone is going to sleep
on its own, or, for whatever reason asterisk cannot send a
packet to the phone and get any reasonable response.
Now is the time to do a 'iax2 debug' and reboot the phone. You
should see the registration occur again, followed by asterisk
trying to send the phone something (some time later). We need
to see the copy/paste results of that.
I was browsing through the phone menus (browser to 192.168.0.201:9999)
and I found a few settings that I fiddled with:
1) Protocol: SIP, IAX or BOTH (both was set so I left it so)
2) Phone Display Number (was SIP, I changed it to IAX)
3) IAX dial prefix: (was set to *1 but I wasn't using it)
4) IAX Server (was blank, I set it to asterisk: 192.168.0.100)
5)IAX Server port & local port are (and were) both at 4569
6) IAX Number - still left blank
7) IAXname - still left blank
8) IAX username - still left blank
9) IAX password - still left blank
10) IAX refresh interval - still left as 60 seconds
11) UPnP - still left disabled
*but* even though I still cannot get the other phone to ring, look at
asterisks response:
(I now dial *1202 instead of just 202 - if just 202 then asterisk does
not respond at all)
Asterisk Ready.
*CLI> Jul 8 23:23:11 NOTICE[10202]: chan_iax2.c:6198
iax2_poke_noanswer: Peer 'z2' is now UNREACHABLE!
Jul 8 23:23:11 NOTICE[10202]: chan_iax2.c:6198 iax2_poke_noanswer: Peer
'z1' is now UNREACHABLE!
Jul 8 23:23:13 NOTICE[10202]: chan_iax2.c:3891 register_verify: Empty
registration from 192.168.0.201
Jul 8 23:23:18 NOTICE[10202]: chan_iax2.c:3891 register_verify: Empty
registration from 192.168.0.202
-- Accepting unauthenticated call from 192.168.0.202, requested
format = 4, actual format = 4
-- Executing Dial("IAX2/[EMAIL PROTECTED]/7", "IAX/z1|20|tr") in new stack
Jul 8 23:23:24 WARNING[10202]: channel.c:1913 ast_request: No channel
type registered for 'IAX'
Jul 8 23:23:24 NOTICE[10202]: app_dial.c:764 dial_exec: Unable to
create channel of type 'IAX'
== Everyone is busy/congested at this time
Jul 8 23:23:34 WARNING[10202]: pbx.c:1948 ast_pbx_run: Timeout, but no
rule 't' in context 'geograph'
-- Hungup 'IAX2/[EMAIL PROTECTED]/7'
Jul 8 23:23:45 NOTICE[10202]: chan_iax2.c:3891 register_verify: Empty
registration from 192.168.0.201
Jul 8 23:23:50 NOTICE[10202]: chan_iax2.c:3891 register_verify: Empty
registration from 192.168.0.202
Jul 8 23:23:50 NOTICE[10202]: chan_iax2.c:5468 socket_read: Rejected
connect attempt from 192.168.0.201, request '[EMAIL PROTECTED]' does not exist
-- Accepting unauthenticated call from 192.168.0.201, requested
format = 4, actual format = 4
-- Executing Dial("IAX2/[EMAIL PROTECTED]/17", "IAX/z2|20|tr") in new stack
Jul 8 23:24:06 WARNING[10202]: channel.c:1913 ast_request: No channel
type registered for 'IAX'
Jul 8 23:24:06 NOTICE[10202]: app_dial.c:764 dial_exec: Unable to
create channel of type 'IAX'
== Everyone is busy/congested at this time
Jul 8 23:24:16 WARNING[10202]: pbx.c:1948 ast_pbx_run: Timeout, but no
rule 't' in context 'geograph'
-- Hungup 'IAX2/[EMAIL PROTECTED]/17'
Jul 8 23:24:17 NOTICE[10202]: chan_iax2.c:3891 register_verify: Empty
registration from 192.168.0.201
Jul 8 23:24:22 NOTICE[10202]: chan_iax2.c:3891 register_verify: Empty
registration from 192.168.0.202
*CLI> stop now
Beginning asterisk shutdown....
Executing last minute cleanups
== Destroying any remaining musiconhold processes
Asterisk cleanly ending (0).
gl0:/home/zls #
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
