Rich Adamson wrote:
If you don't mind, can you explain me a little more the ztcfg problem. My
experience with that is null, but I need to setup a box for testing purposes
only, and I don't want to but a TDM card only for make it work.
I know people that has asterisk running on SIP that don't use zaptel &
Zapata just they do sip also to their provider (which is not my my case) but
I never did that.
So I plan to install it with Ztdummy on top of FC2.
FWIW, I've been running asterisk on a RHv9 laptop (for client demo
purposes), connecting it via iax to our office system, and never
worried about ztdummy, etc. Obviously, the laptop has no zap cards.
This demo never includes meetme, etc.
I'm not actually surprised. In the Makefile you'll see somewhere around
line 61 that ztdummy is commented out and, if you *want* ztdummy, you
should remove the "#" before running make linux26.
However, if you follow through the use of the variable names, you will
see that ztdummy is suffiex anyway so whether you comment it in or out,
ztdummy gets compiled.
It would me interesting to do an "lsmod | grep z" on your laptop to see
if zaptel & ztdummy are loaded.
I also have a backup system (to our office system) running RHv9, and
it connects and functions just fine to the primary office system
via iax. Sip phones work fine on this backup system as well.
That backup system was just recently replaced with an FC3 system, and
I have no doubt whatsoever it will function just fine without zap
cards although that system has not yet been configured or tested.
So, don't be too concerned with making ztdummy (etc) function unless
you truly want to support those asterisk apps that need it (eg, meetme
and whatever else the wiki points out).
(I seem to remember IAX needed timing, which is why I was on the ztdummy
mission - no cards in my testbox either.)
Okay, just fired up the laptop and it registered with our office
system just fine using iax2.
The laptop is RHv9 with cvs-head from 4/25/05 with no modifications of
any sort. The lsmod lists zaptel only, Used = 0, and no ztdummy listed.
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Hmmm - interesting.
I did an rmmod on both ztdummy and zaptel and then fired up asterisk.
I could still make a call from 1 extension to another, but both
music_on_hold *and* IAX2 complained about timing (but I could still make
the call!!). I haven't played with MOH yet, so I dont know if the sound
will work or be choppy.
Let the mystery remain....?
Cheers,
Zoltan.
***********************************
[res_musiconhold.so] => (Music On Hold Resource)
== Parsing '/etc/asterisk/musiconhold.conf': Found
Jul 10 19:20:53 WARNING[3548]: res_musiconhold.c:565 moh_register:
Unable to open pseudo channel for timing... Sound may be choppy.
== Registered application 'MusicOnHold'
== Registered application 'WaitMusicOnHold'
== Registered application 'SetMusicOnHold'
*** cut a bit out ******
[chan_iax2.so] => (Inter Asterisk eXchange (Ver 2))
Jul 10 19:20:53 WARNING[3548]: chan_iax2.c:7477 load_module: Unable to
open IAX timing interface: No such file or directory
== Manager registered action IAXpeers
== Parsing '/etc/asterisk/iax.conf': Found
-- Seeding 'z1' at 192.168.0.201:4569 for 60
-- Seeding 'z2' at 192.168.0.202:4569 for 60
== Registered channel type 'IAX2' (Inter Asterisk eXchange Driver (Ver 2))
== Using TOS bits 0
== IAX Ready and Listening on 0.0.0.0 port 4569
== Loaded firmware 'iaxy.bin'
== Parsing '/etc/asterisk/iaxprov.conf': Found
-- Loaded provisioning template 'default'
*******************************************
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
