I have a similar or maybe the same issue. I have found no solution for it but to just ignore the new hardware prompt. I saw someone say in an earlier email that the pci subvendor id seems to change at random on reboot, causing the card to be redetected. I also find that if the card is connected to a TE410p or may be just if it is connected to a PRI in general (E1) that the card drivers won't unload and then will fail to redetect the card on reboot. I have remote access cards in all my servers with these and power cycle the server when the drivers need to be reloaded. Not an ideal situation but acceptable for my purposes.
Craig ----- Original Message ----- From: <[EMAIL PROTECTED]> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <[email protected]> Sent: Tuesday, July 12, 2005 7:03 AM Subject: [Asterisk-Users] Digium Wildcard TE110P IRQ problem > Folks: > > I'm trying to reach for help, I have a Digium Wildcard TE110P, on an E1, > the problem is every time the server reboots sometimes, and the system > does not recognize the card. I have on the Bios disabled the PNP OS and > the irq's are assigned manually, IRQ 9 for slot 3 (where I have installed > the card) bus still have the same problem. > > Is there a way to fix or hardcode the irq for the card? > > Thanks in advance for your help > > JR > > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
