We are using Teliax IAX2, Asterisk
CVS-v1-0-04/29/05-16:47:42, AMP 1.0.7, IP500 phone and we are able to get to
both numbers and use the touch tones to go though the automated system.
We have seen using the touch tones on
other numbers where it thinks that you are pressing the numbers multiple times
but it has been rare, mostly just an echo.
Rick
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Wednesday, July 13, 2005
7:48 AM
To: Asterisk Users Mailing List -
Non-Commercial Discussion
Subject: Re: [Asterisk-Users]
Unable to call certain 800 numbers through Teliax
I'm using AAH 1.1 (Asterisk 1.0.7) w/ Teliax using IAX2. I can
successfully call those 2 numbers. I'm using IP500 phone.
At 08:03 PM 7/12/2005, you wrote:
We are unable to call certain 800 numbers through Teliax but
I thought I would post this here and see if anyone else had the same problem
with either Teliax or other carriers.
The 800 numbers causing problems pick-up the call right away and are in the US - American
Airlines (8004337300) and Staples (800-378-2753) - we can call many other 800
numbers just fine.
Our asterisk setup has a 4-port digium analog card as well as a Teliax account,
currently connected via IAX2. We are able to call the 800-numbers above through
the digium card but not through Teliax. We have also tried calling the numbers
with Asterisk and SIP through Teliax with no-luck either. We have also tried
using several IAX soft-phones (using iaxComm) directly with Teliax account (no
Asterisk) and have the same problem.
The *only* way that we have been able to call these numbers through Teliax is
to directly X-Lite directly connected to Teliax through SIP - so Teliax claims
that it is not a problem with their service, but with Asterisk.
In examining the asterisk log output it appears that the channel is never
answered and continues to ring indefinately. My guess is that there is a timing
issue with the signals being sent and recieved by Asterisk and Teliax and that
the "answered" is probably being transmitted before the
"ringing" signal and is therefore being ignored by asterisk and
iaxComm.
If anyone could give this a shot and see what works or doesn't work that would
be great.
We have reproduced this with Asterisk 1.0.7 and 1.0.9.
Thanks,
Cullin
|
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
