Am Don, 2003-09-18 um 16.36 schrieb Roy Sigurd Karlsbakk: > hi all hi roy,
> > I'm trying to setup a dlink dph-100h phone (actually a dph-100m but with > the h.323 software) with asterisk and chan_h323. AFACS, the dph-100h > software can only be configured to point to a gatekeeper. I know I don't > need to do this, but it's a test before I setup my Symbol Netvision > phones (I don't have an access point for them now). First, this is what > I have, and what I've done: > > - Platform is Debian Woody/Stable > - Asterisk is fresh from CVS, and so is chan_h323 > - chan_h323 did compile, but also died from a rather nasty SIGSEGV > (reported earlier) with Open H.323 v1.11.7 and PWLib v1.4.11. I > checked them out from CVS instead after being adviced so by diana > (on irc), and it now loads into memory without any fuzz. > - Several people have told me chan_capi can work as a gatekeeper, so > there should be no use for gnugk or any others. I have yet to find > where this is hidden. FWICS, this is all commented out (ast_h323.cpp > line 722). Is this right or have I overseen anything? i can confirm that chan_capi will not work as a gatekeeper under any circumstances! somebody is obviously trying to confuse you.;-) > - If this cannot be done alone with chan_h323, I guess I need to use > gnugk or something. Can someone help me out how these two should be > configured to work together? Also - is it possible to run gnugk on > the same host as asterisk? > > Thanks for all help > > Best regards > > Roy Sigurd Karlsbakk <[EMAIL PROTECTED]> > best regards kapejod -- Klaus-Peter Junghanns CEO,CTO Junghanns.NET GmbH Breite Strasse 13 - 12167 Berlin - Germany fon: +49 30 79705392 fax: +49 30 79705391 iaxtel: 1-700-157-8753 email: [EMAIL PROTECTED] http://www.junghanns.net/asterisk _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
