Hi Michael,
registration is working now, it dials out the phone is ringing but then comes a hang up.... I'am i lttle newbe on h323 :-)
Can you take a look on the log file ?
Your connection attempt terminates with a "EndedByRefusal" reason. My guess is that you are not allowed to use the codec you are trying to use (e.g. if you are using a g.711 try to switch to a lower bit-rate one). Or some other reason?
Thanks,
Thomas.
Michael.
-----Urspr�ngliche Nachricht----- Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Auftrag von Michael Manousos Gesendet: Dienstag, 16. September 2003 15:54 An: [EMAIL PROTECTED] Betreff: Re: AW: AW: [Asterisk-Users] h323 gatekeeper registration failed
Thomas Haeger wrote:
No. I have installed the versions wich your special friend has
recommended.
Shall i try to update to the newest versions ? (But then wouldn't work the chan_h323.so further...)
I don't know what are the problems with that driver, but, yes, you should install the latest versions. Before this, check the configuration of the remote gatekeeper (if this is possible) and see if there are special requirements for the registration.
Michael.
-----Urspr�ngliche Nachricht----- Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Auftrag von Michael Manousos Gesendet: Dienstag, 16. September 2003 13:53 An: [EMAIL PROTECTED] Betreff: Re: AW: [Asterisk-Users] h323 gatekeeper registration failed
Thomas Haeger wrote:
Hi Michael,
this gatekeeper works without a password but with a H323-ID, but this will be send with the dial command, i think.
No, this id is provided during registration.
Here is the trace with trace level 10 (?) ....
Unfortunately, the GK rejects the registration attempt with an undefined reason (!). Did you try it with the latest OpenH323/pwlib ?
Regards,
Thomas.
Michael.
-----Urspr�ngliche Nachricht----- Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Auftrag von Michael Manousos Gesendet: Dienstag, 16. September 2003 12:22 An: [EMAIL PROTECTED] Betreff: Re: [Asterisk-Users] h323 gatekeeper registration failed
If the gatekeeper requires a password and you don't provide one during the registration, then it will fail. In oh323.conf use the "gatekeeperPassword" to provide the passwd.
If this is not the case enable tracing info in oh323.conf, rerun and send me the trace file to take a look.
Michael.
Thomas Haeger wrote:
Hi all,
i have tried to connect to a clarent gatekeeper. I have used both of h323 drivers chan_h323.so and chan_oh323.so. But no one can register to this gatekeeper. Our ip is activated on this gatekeeper.
Maybe, i do wrong anything....
I have only set the "gatekeeper" option in the h323.conf or oh323.conf to the ip address from the gatekeeper. gatekeeper=x.x.x.x
But no one of the both driver can register to this gateway.
Is there another thing that i have to keep ?
I need yours help urgently. We want to go online with our *-gateway as
soon
as possible.
Thanks, Thomas.
******************************************* beroNet technologies GmbH Dipl.- Ing. Thomas H�ger Potsdamer Str. 18 A 14513 Teltow
FON: +49 (0) 3328 3077731 FAX: +49 (0) 3328 334779 Email: [EMAIL PROTECTED] *******************************************
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
