Hi Kape, Life is generally good with bristuff and the quadBRI cards. However I've got a concern: how does one return a busy signal to the telco when all B channels are busy? Right now, when all channels are in use, the remote caller is kept waiting until the telco times out and finally get a busy signal (on a land line) or error tone (mobile).
On the asterisk side here is the output: -- Ignoring callwaiting SETUP on channel 0/0 span 4 0 Jul 18 10:21:20 WARNING[27332]: chan_iax2.c:5063 socket_read: midget packet received (1 of 4 min) Jul 18 10:21:22 WARNING[27325]: chan_zap.c:7534 zt_pri_error: PRI: received SETUP message for call that is not a new call, wicked!!! going on ... -- Ignoring callwaiting SETUP on channel 0/0 span 4 0 Thanks in advance for your help, Best regards, _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users