Hmmm.. I was unaware of the localnet parameter. I don't think the remote lan should be added to it though, since asterisk still needs to go through a gateway (the VPN itself) to access the remote LAN.
Pete On 18 July 2005 7:53 am, Julian J. M. wrote: > Make sure, you include remote office's lan in the localnet directive > (otherwise, they'll use the wan ip address, and that may be the > problem...) > > Julian. > > On 7/15/05, Peter Osborne <[EMAIL PROTECTED]> wrote: > > Hi All, > > > > I'm using Asterisk for my PBX, I have a remote office that is connected > > by a VPN link. I am using Openswan on my side and a Linksys box on the > > remote side. I have a Polycom IP300 on the remote side configured with a > > static IP address. When I call the phone on the remote side, it rings and > > establishes the call fine. The problem I am having is that the remote > > side can hear the call find but the local side hears nothing. Because of > > the VPN there are no firwalls in the way. Does anyone have some ideas or > > atleast how I can track down the problem. > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
