Thanks Adam. My channel banks are pretty old (NEC ND4's) so they don't do
anything for echo. I'll have to try tweaking Asterisk.
Aaron
----- Original Message -----
From: "Adam Goryachev" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<[email protected]>
Sent: Monday, July 18, 2005 9:46 AM
Subject: Re: [Asterisk-Users] Iaxy and Echo
On Mon, 2005-07-18 at 09:25 -0600, Aaron with Morad wrote:
I have been searching for a while and can't find anything specific
like this.
Here's is my setup:
IAXy -- broadband network -- Asterisk -- TE110P -- Channel
Bank -- POTS lines (FXO)
Everything works fine except for the echo at the IAXy. There is no
echo on the POTS end, so Asterisk is doing a good job of echo
canceling. Is there any provisioning in the IAXy to do echo
canceling?
If you get echo on the IAXy end, then asterisk is NOT doing it's echo
cancellation function fully. The POTS user will never get echo if you
don't generate any, or their echo cancellation is functioning correctly.
So, you need to tune the echo cancellation at your asterisk box (or
perhaps you can do that in your channel bank?? I dunno how clever those
things are)...
Regards,
Adam
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
