On Fri, 2005-07-15 at 20:44 -0700, Chris Coulthurst wrote: > Being one the many people trying to track down echo 'ghosts' I ran across > this page: > > http://lists.digium.com/pipermail/asterisk-users/2004-November/071301.html > suggesting ways to adjust the gain. I have a TDM400P 2x2 config with > Kewlstart lines configured. I've located a local telco milliwatt test line, > and when I call it, the gain numbers are no where near 14844. Now, this > article refers to configuration with a channel bank, but suggests it would > be similar on 'simpler equipment'. > > The numbers I get are around 4450 on the Rx. > > [EMAIL PROTECTED] zaptel]# ./ztmonitor 5 -vv > > Visual Audio Levels. > -------------------- > Use zapata.conf file to adjust the gains if needed. > > ( # = Audio Level * = Max Audio Hit ) > <----------------(RX)----------------> > <----------------(TX)----------------> > ########################* > Rx: 4452 ( 4452) Tx: 46 ( 63) > > Is this good? Normal? Any suggestions, or a point in the right direction for > the right documentation would be appreciated. > > P.S. This is CVS-HEAD Zaptel on a P3 550, Host bridge: Intel Corp. > 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 3) > > Chris Coulthurst > [EMAIL PROTECTED] > > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
