Hi,
I'm trying to configure a quadbri card using the configuration found in Bristuff.
I know the configuration of telco is point-to-point and I think the card have to work in NT mode (I presume because I have
not found the documentation about this and when attach to the ISDN the led become green).
I'm not able to make and receive call. When I receive a call nothing happen in the asterisk cli and from the caller I receive
a connection error.
When I try to make a call I receive "unable to create zap channel"
THis is my configuration:
Zapata.conf
switchtype = euroisdn
signalling = bri_net
pridialplan = local
prilocaldialplan = local
nationalprefix = 0
internationalprefix = 00
echocancel = yes
context=default
group = 1
; S/T port 1
channel => 1-2
signalling = bri_net
group = 2
; S/T port 2
channel => 4-5
signalling = bri_net
group = 3
; S/T port 3
channel => 7-8
signalling = bri_net
group = 4
; S/T port 4
channel => 10-11
signalling = bri_net
Zaptel.conf
loadzone=it
defaultzone=it
span=1,1,3,ccs,ami
span=2,0,3,ccs,ami
span=3,0,3,ccs,ami
span=4,0,3,ccs,ami
bchan=1,2
dchan=3
bchan=4,5
dchan=6
bchan=7,8
dchan=9
bchan=10,11
dchan=12
Bye
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
