Hi to all once again Thanks for you help. I always get my problem solved from here.
What i did. export CVSROOT=:pserver:[EMAIL PROTECTED]:/usr/cvsroot cvs login cvs checkout -r v1-0 zaptel libpri asterisk and then compiled each of them then on running /etc/init.d/zaptel start Both of cards are configured now and their LED's are on now. But the problem is that I cannot get asterisk work with my old files. I am getting the following errors in my Asterisk-messages log file Jul 21 11:55:10 WARNING[1607]: /usr/lib/asterisk/modules/pbx_dundi.so: undefined symbol: pbx_substitute_variables_varshead Jul 21 11:55:10 WARNING[1607]: Loading module pbx_dundi.so failed! Regards, Mazhar On 7/20/05, Watkins, Bradley <[EMAIL PROTECTED]> wrote: > What revision of card is the new one? It sounds like you have one of the > new Rev I cards and you aren't running either 1.0.9 or CVS HEAD. Either of > these will solve your problem if I am correct. > > Regards, > - Brad > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Mazhar Hussain > Sent: Wednesday, July 20, 2005 7:22 AM > To: [email protected] > Cc: [EMAIL PROTECTED] > Subject: [Asterisk-Users] Problem while configuring two TDM400P cards > > > Hi to all, > > > I have been using Wildcard TDM400P with four fxs modules and it was working > fine now I have added another Wildcard TDM400P with four fxs modules . So > there are total 8 ports for 8 hard phones. > > I have modified following configurations > > In /etc/zaptel.conf > loadzone=us > defaultzone=us > fxoks=1-8 > > in > > /etc/asterisk/zapata.conf > context=headoffice > signalling = fxo_ks > callerid="HeadOffice" > channel => 1-4 > ;channel => 1-8 > > /sbin/modprobe wcfxs > works fine ans show eight modules mapped. > > But when I run > /sbin/ztcfg -vvv > I get following error > > ZT_CHANCONFIG failed on channel 5 > Is there error in configuration I also have checked Diguim card separately > it works > > This I found in /var/log/asterisk/messages > > > > > Jul 20 11:57:04 WARNING[1144]: Unable to specify channel 5: Device or > resource busy Jul 20 11:57:04 ERROR[1144]: Unable to open channel 5: Device > or resource busy here = 0, tmp->channel = 5, channel = 5 Jul 20 11:57:04 > ERROR[1144]: Unable to register channel '1-8' Jul 20 11:57:04 WARNING[1144]: > chan_zap.so: load_module failed, returning -1 Jul 20 11:57:04 WARNING[1144]: > Loading module chan_zap.so failed! > > I will be very tanksfull to for this help. As I always get my query solved > from here. > > Regards, > Mazhar > Nettechltd.com > > > > The contents of this e-mail are intended for the named addressee only. It > contains information that may be confidential. Unless you are the named > addressee or an authorized designee, you may not copy or use it, or disclose > it to anyone else. If you received it in error please notify us immediately > and then destroy it. > > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
