This only works if you DONT have: insecure=very
in your SIP section. Rene Kluwen Chimit > In sip.conf you specify a context right? > > In extensions.conf, in that context, you route the call... > > exten => 12134441234,1,Dial(whatever) > > > > --On Thursday, July 21, 2005 11:30 AM -0600 "Olusoji (soji) Oyenuga" > <[EMAIL PROTECTED]> wrote: > >> >> Hi, >> >> This is my setup; >> >> 1. PSTN ==> Cisco ==> Internet ==> Asterisks ==> Grandstream Phone >> 2. Grandstream ATA =>SIP Proxy ==> Internet ==> Asterisks ==> >> Grandstream Phone >> >> In both cases above when I dialed the DID (say) 1-213-444-1234 from >> either the PSTN or Grandstream ATA the response I "see" on the asterisks >> is somthing like this below; >> >> "SIP/kkk.kkk.kkk.kkk-084cfc38" ==> where kkk.kkk.kkk.kkk is the IP >> address on the Cisco or SIP Proxy >> >> I was actually expecting something like >> >> SIP/12134441234 >> >> that will allow me the opportunity to route the incoming calls by DID to >> different context base on each DID. >> >> How do I achieve this? >> >> ------------------------------------------------------------- >> Olusoji (Soji) Oyenuga >> Senior VoIP Project Manager >> Modern Digital Communications Inc >> Phone: 1-306-683-2089 >> Email: [EMAIL PROTECTED] >> MSN: [EMAIL PROTECTED] >> http://www.mdci.ca > > > > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
