"pri debug span 1"
will show you what the PRI is sending to you, before you do that:
have you tried the previous suggestion of issuing a Wait(1) (i actually
suggest 2) prior to Answer or Dial?
Ryan Williams wrote:
How do I go about doing this? I can not find any documentation on "isdn
trace"
Should I be receiving CID Name as well as number if I am on a PRI line?
I am fairly certain it was working when we had POTS lines.
-Ryan
-----Original Message-----
From: Paul Belanger [mailto:[EMAIL PROTECTED]
Sent: Thursday, July 21, 2005 6:50 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] caller id on a T1 PRI
Ryan Williams wrote:
I understand how CID works and how you must set CID when dialing out on
a PRI and how the phone company sets the name.
I was wondering how this works in regards to inbound calls. I have a
pri
and I get the number that the caller is coming from but I do not get
the
name. Is this normal? How do I end up getting the name on this PRI as
well?
It could be possible the telco is not sending it to you. You could
always setup an ISDN trace and post the results; just to be sure.
PB
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
