We had two cards in the system - BRI card and analog TDM from Digium.
The problem was caused by incorect modules.conf. There was a
post-install directive for the TDM card which runs ztcfg. Additionaly I
was running ztcfg from the asterisk startup scripts as well - which was
the problem.
So I can say Junghanns card works in Dell PowerEdge 2800.
-
David Hajek
IT/IS Manager
Systinet Corporation
Phone: +420 2 7201 9526
Cell: +420 604 352 968
[EMAIL PROTECTED]
http://www.systinet.com
David Hajek wrote:
Thanks.
My cable is like 8-10m long. Hm, will try to make shorter one but it
works in old system. Who knows.
-
David Hajek
IT/IS Manager
Systinet Corporation
Phone: +420 2 7201 9526
Cell: +420 604 352 968
[EMAIL PROTECTED]
http://www.systinet.com
Michiel van Baak wrote:
On 11:31, Wed 20 Jul 05, David Hajek wrote:
Hi,
we are trying to install Junghann's quadBRI into Dell PowerEdge 2800
system without success.
I don't know if the issue can be that Junghann's card fits 32-bit
slot and Dell PE 2800 has
only 3 PCI-X 64-bit slots. Can this be an issue?
We get "CRC errors for HDLC frame" when the card is initialized.
Any idea what can be wrong?
1/ We use latest bristuff packages.
2/ We use TE mode
3/ Card is working on older 2.4 system, we use same cables and ISDN
devices.
4/ On Dell we have a Centos 4.1 with 2.6.12 kernel.
After loading the driver we got CRC errors like this:
Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on
card 1 (cardID 0) S/T port 1
Hi,
I had the same errors too when I started to test with the
4port card.
After changing the 200M UTP cable that was all put in a
corner for a 2 meter cable the problems went away.
I read on some previous posts from Klaus-Peter that the CRC
errors mean bad cables. In my case the way-too-long cable
from the NT1 to my * box was the cause.
Maybe this can be of any help
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
