http://www.digium.com/index.php?menu=whatpcislot
On 7/26/05, Wilson Pickett <[EMAIL PROTECTED]> wrote: > > I was looking through the cards, and could not tell the difference between > > TE410P and TDM400P. > > TDM400P has the possibility of up to 4 FXS or FXO modules for use with > regular analog telephones (into FXS mods) or regular POTS lines (using > FXO) > > > Looking at the picture, both of them can support up to 4 FXO. TE410P does > > not need any additional modules, with if I use TDM400P then I need to buy > > FXO modules, X100M right? > If you want to use them to connect to the phone system, you need a > TDM400P is the lines are plain anaglog. > > > I want to build a simple IVR with my Asterisk and also send faxes using > > sendfax command. Do I need to get FXS ports or can I just get away with FXO? > FXS connects to phones, FXO to phone lines. FXO gives a dialone, FXS > generates dialtone. > > > Also, I am going to use Dell Dimensions 2400 - can I go with TE410P or > > should I get TE405? It seems like some cards are 3.3 V and some are 5V... > > Which one do I need to this PC? > > Can't help you there, sorry. > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- <sig> Andrew Latham - AKA: LATHAMA (lay-th-ham-eh) WWW: http://lathama.com Email: [EMAIL PROTECTED] - [EMAIL PROTECTED] - [EMAIL PROTECTED] If any of the above are down we have bigger problems than my email! </sig> _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
