I just did the modprobe 2 times and it worked but that was on the 2.6.9
kernel
Something about core 3 taking its time to create the device
modprobe zaptel
sleep 3
modprobe zaptel
:-)
Peter Raaijmakers wrote:
Hi,
In struggeling with this problem for a two weeks now.
I have a X100P clone card in my * box but I'm not able to get it to run.
I'm running fedora core 3 with kernel 2.6.12-1.1372_FC3 on a VIA
EPIAML500EA
The compiling of both zaptel and asterisk went without any errors.
I can run zaptel and asterisk without any errors.
When I run ztcfg I don't get any errors too.
But when I try to place a call trough my x100p I get this error
message in asterisk:
NOTICE app_dial.c:1091 dial_exec_full: Unable to create channel op
type 'Zap'
Outside calls are not comming in either.
Here are my zapata.conf and zaptel.conf:
------------
-zapata.conf-
[channels]
signalling=fxs_ks
context=incoming
channel=>1
-zaptel.conf-
loadzone = nl
defaultzone=nl
fxsks=1
-----------
The funny part comes here:
I'm installing a *box for a friend with a ISDN card and the same
problem occures.
So I probarbly doing something wrong in fedora...
Any ideas???
Thanks,
Peter
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
