I tend to make it pause for 10 secs when loading the module as I have had a few occurances of loading before /dev/zap has been populated. Wouldn't trust the 2.6.12 kernel as far as I could virutally throw it.
Has anyone had any problems with PCI-X systems? In particular call dropping? Regards Lee -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Altus Snyman Sent: 27 July 2005 12:45 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Zaptel error: Unable to create channel op type'Zap' I just did the modprobe 2 times and it worked but that was on the 2.6.9 kernel Something about core 3 taking its time to create the device modprobe zaptel sleep 3 modprobe zaptel :-) Peter Raaijmakers wrote: > Hi, > > In struggeling with this problem for a two weeks now. > I have a X100P clone card in my * box but I'm not able to get it to run. > I'm running fedora core 3 with kernel 2.6.12-1.1372_FC3 on a VIA > EPIAML500EA > > The compiling of both zaptel and asterisk went without any errors. > I can run zaptel and asterisk without any errors. > When I run ztcfg I don't get any errors too. > > But when I try to place a call trough my x100p I get this error > message in asterisk: > NOTICE app_dial.c:1091 dial_exec_full: Unable to create channel op > type 'Zap' > > Outside calls are not comming in either. > > Here are my zapata.conf and zaptel.conf: > > ------------ > -zapata.conf- > [channels] > signalling=fxs_ks > context=incoming > channel=>1 > > -zaptel.conf- > loadzone = nl > defaultzone=nl > > fxsks=1 > > ----------- > > The funny part comes here: > I'm installing a *box for a friend with a ISDN card and the same > problem occures. > So I probarbly doing something wrong in fedora... > > Any ideas??? > > Thanks, > Peter > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.338 / Virus Database: 267.9.5/58 - Release Date: 25/07/2005 -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.338 / Virus Database: 267.9.5/58 - Release Date: 25/07/2005 _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
