Hi, This is what I have and is working just fine. I disabled Asterisk gatekeeper and registered directly to a Cisco CallManager 3.3.4 via h323 trunk.
; ; Configuration file of OpenH323 channel driver ; ;----------------------------------------- ; General configuration options ; (ports, jitter, GK, ...) ;----------------------------------------- [general] ; ; Address to bind to for incoming connections. ; Default is ALL. ; listenAddress=0.0.0.0 ; Port to listen to. ; Default value is 1720. ; listenPort=1720 ; ; Port to connect to. ; (Used only when we don't have a gatekeeper) ; Default value is 1720. ; connectPort=1720 ; ; Configure TCP port range to be used by H.323 ; tcpStart=10000 tcpEnd=20000 ; ; Configure UDP port range to be used by H.323 ; Note: The port range used by RTP are configured from ; "rtp.conf" ; udpStart=10000 udpEnd=20000 ; ; Enable fast start (yes,no). ; fastStart=no ; ; Enable H.245 tunnelling (yes,no). ; h245Tunnelling=no ; ; Enable early H.245 messages in call SETUP message. ; h245inSetup=no ; ; Enable in-band-DTMF detection. ; (Note: Netmeeting uses in-band DTMFs) ; inBandDTMF=no ; ; Enable silence suppression. ; silenceSuppression=no ; ; Set jitter buffer (in milliseconds, 20...10000). ; jitterMin=20 jitterMax=100 ; ; Set IP Type-of-Service byte for RTP channels. ; Valid values for this option are: ; lowdelay, throughput, reliability, mincost, none ; ipTos=none ; ; Set the maximum number of inbound/outbound/simultaneous ; H.323 connections. ; outboundMax=10 inboundMax=10 simultaneousMax=10 ; ; Set the bandwidth limit for H.323 connections. ; The value is in Kbps. ; bandwidthLimit=1024 ; ; Set tracing options for the wrapper library and for the ; OpenH323 library. ; libTraceFile can be 'stdout' or a full path name to the tracefile. ; Only trace info for OpenH323 is logged in libTraceFile. ; wrapLibTraceLevel=3 libTraceLevel=3 libTraceFile=/root/h323.log ; ; Disable gatekeeper or specify a gatekeeper. ; Valid values for this option are: ; DISABLE, ; DISCOVER, ; <gatekeeper's DNS name>, ; <gatekeeper's ip>, ; GKID:<gatekeeper's id> ; ;gatekeeper=192.168.2.2 gatekeeper=DISABLE AllowGKRouted=yes ; ; Set the gatekeeper password ; ;gatekeeperPassword=secret ; ; Set the gatekeeper registration timeout ; gatekeeperTTL=600 ; ; Set the mode for sending user-input ; Valid values for this option are: ; Q931 - Q.931 Keypad Information Element ; STRING - H.245 string ; TONE - H.245 tone ; RFC2833 - RFC2833 ; userInputMode=TONE ; ; AMA flags (default, omit, billing, documentation) ; amaFlags=default ; ; Account code ; accountCode=H323 ; ; Set the default context of H.323 calls. ; ;context=voip-h323 context=from-pstn ;----------------------------------------- ; Configure H.323 aliases, prefixes and ; related ASTERISK's contexts ;----------------------------------------- [register] ; ; Aliases/prefixes associated with the default context ; defined in section [general]. ; alias=asterisk alias=123 ; ; Aliases/prefixes routed in "all-aliases" context. ; context=all-aliases alias=ASTERISK alias=666 ; ; Aliases/prefixes routed in "more-aliases" context. ; context=more-aliases alias=665 ; ; Aliases/prefixes routed in "all-prefixes" context. ; context=all-prefixes gwprefix=00 gwprefix=01 ; ; Aliases/prefixes routed in "more-stuff" context. ; ;context=from-pstn ;alias=fax ;gwprefix=14002 ;----------------------------------------- ; Specify and configure CODEC related ; options ;----------------------------------------- [codecs] ; ; Define the codec list of the channel driver. ; Every "codec" option may have a "frames" option ; associated with it. ; Valid values for the "codec" option are: ; G711U - G.711 u-Law ; G711A - G.711 A-Law ; G7231 - G.723.1(6.3k) ; G72316K3 - G.723.1(6.3k) ; G72315K3 - G.723.1(5.3k) ; G7231A6K3 - G.723.1A(6.3k) ; G7231A6K3 - G.723.1A(6.3k) ; G726 - G.726(32k) ; G72616K - G.726(16k) ; G72624K - G.726(24k) ; G72632K - G.726(32k) ; G72640K - G.726(40k) ; G728 - G.728 ; G729 - G.729 ; G729A - G.729A ; G729B - G.729B ; G729AB - G.729AB ; GSM0610 - GSM 0610 ; MSGSM - Microsoft GSM Audio Capability ; LPC10 - LPC-10 ; Number of frames in RTP packet (if not specified) is 1. ; codec=G711A frames=20 ;codec=G711U ;frames=20 ;codec=GSM0610 ;frames=4 ;codec=G7231 ;frames=2 ;codec=G729 ;frames=2 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kanuri, Seshu (Company IT) Sent: Wednesday, July 27, 2005 4:40 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] H323 Configuration file Folks! I would appreciate if someone could send me a simple working h323 configuration file oh323.conf that is part of [EMAIL PROTECTED] installation. I have tried to use the oh323.conf content listed on WIKI but it is just not working as my H323 endpoint ( PA168 based ATCOM Phone) cannot register. I need a working example of this file for similar phone. Seshu -------------------------------------------------------- NOTICE: If received in error, please destroy and notify sender. Sender does not waive confidentiality or privilege, and use is prohibited. _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
