try to see if u have set at sip.conf *dtmfmode=rfc2833*
Michael George wrote:
I am having a strange problem with polycom 501 and dailing. I've read the archives and no one there specifically mentions this problem, so I thought I'd ask here. The problem is that when the user picks up the receiver or pressed new call, sometimes they will enter a number (for example 95072091234) and in the middle of the number the cursor might jump back one digit. So the call above, if just typed into the phone, might end up: 9507291234. Other times the cursor might jump right back to the beginning of the number. This doesn't happen when they enter the number and the press "dial", so it seems to be a digitmap problem. However, the digitmap is nearly the same as what I've used on IP-500s in the past. It is: "[0]|*8|*2xx|#5|#7x|[278]xx|[9]11|9411|9x.T" [Actually it was " [0]|*8|*2xx|#5|#7x|[278]xx|[9]11|9411|9x.T" -- I don't know where that space came from, but I'll take it out and test again today.] Are there any obvious problems with that digitmap? Anything else that I should take a look at? Thank you.
-- ____________________________________________________________________ BRUNO DE LUCA Tel. +39 02 9350 4780 (102) FG&A Software 20017 Rho - Via Puccini, 8 E-Mail : [EMAIL PROTECTED] Internet: http://www.fgasoftware.com _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
