You aren't dealing with analog phones, and you aren't transmitting DTMF
signals.. the functional difference between analog and digital systems
kindof precludes what you are looking to do.. meanwhile, once the entire
number has been dialed, the outgoing call should be started almost
instantaneously..
maybe set the initial context so that the longest dial string is the
length of the extension..?
Frank Sautter wrote:
Maik Schmitt schrieb:
one of our customers which wants a soft transfer between his old pbx to
asterisk and sip. the setup is as follows:
telco <---pri---> asterisk <---pri---> legacy pbx
everything is fine exept that when dialling from the legacy pbx it
takes
about 3 seconds before the asterisk start to dial.
where does this delay come from?
has it to do with 'overlapdial=yes'?
This is normal behaviour if you use '.' in your extensions.conf. Use
'!' instead and Asterisk will start dialing immediately.
when i change '.' to '!' then the overlap digits get lost. this means
the longest number dialled on my telco line is as long as there are
abigous matches in the dialplan.
isn't there a way to start dialling after one received enough digits
to decide which path to dial and then still transmit the remaining
(overlapping) digits?
regards
frank
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
