The implementation of *72 is done for FXS port (the one that gives the dialtone). However you could implement that with some extensions.conf logic.
regards Martin On Sat, 20 Sep 2003, Rich Adamson wrote: > Martin, > > That makes sense... but how would one actually use "*72#", as an example, > when * has two x100p FX ports? i.e, can one enable call forwarding on one > fx port and not the other? > > If I want to call forward my extension (say extn 3000) to extn 3001, is > there a way for the user to do that without changing config files? > > Rich > ------------------------ > > These functions are implemented only for chan_zap (zaptel hardware) and > > work for FXS/FXO ports. Exception is *8 (remote call pickup) as far as I > > know. > > > > regards > > Martin > > > > On Fri, 19 Sep 2003, Rich Adamson wrote: > > > > > Someone recently posted the following list as functions built into * > > > > > > *0# sends flash > > > *8# remote call pickup (pickup phone in your group) > > > *67# disable caller id > > > *70# no call waiting > > > *78# do not disturb on > > > *79# do not disturb off > > > *72# enable call forwarding > > > *73# disable call forwarding > > > *82# enable callerid > > > > > > I'm running a CVS from a couple of weeks ago with multiple C7960's, > > > snom 200, ata186, links to fwd and iaxtel, two x100p incoming fx > > > lines, MoH, etc. Everything attempted to date is now working fine. > > > > > > However, testing the above list tends to suggest they don't work (or > > > at least they don't work as I would expect them to.) > > > > > > Example, from a C7960 I dial *78# and hang up. From another sip phone > > > I Dial that extenstion and the 7960 rings. I expected the call to roll > > > over to voicemail or something. Am I missing something here, or are > > > these functions not expected to work on a per-extension basis? > > > > > > I was assuming (probably incorrectly) these functions were custom > > > calling features implemented within * for all extensions. Are my > > > assumptions wrong or do I have to implement something for these to > > > work? > > > > > > TIA, > > > Rich > > > > > > > > > > > > > > > > > > _______________________________________________ > > > Asterisk-Users mailing list > > > [EMAIL PROTECTED] > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > ---------------End of Original Message----------------- > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
